Stage 1 MA-010 HFAY Package Deal
 Click to enlarge |
|
We often get asked "What parts do I need to be competitive in How Fast Are You competitions".
A good starting point for the AWD would be :
|
The rounded sidewall and semi slick tread pattern will cure the high center of gravity rollovers the awd is well known for. |
|
8° Radial Groove Tyre - Wide (for RCP Track) The 8° Radial from Atomic seem to work best with the V pattern fronts, we are looking for a neutral setup to get you started. |
|
PN Racing MA010 Pro II Spring Set (5 pairs) Lower and stiffer than stock, again helping with the C.O.G problem. We recommend light blue front and green rear for this setup with the kit supplied .6mm spacers under the wheel hubs. |
|
AWD Alu. Universal Shaft (2 pairs) The stock shafts work fine for drifting but over time will get weaker, this is one of the first upgrades to make when you get down to racing. |
|
Most stock AWD's come with center shaft and differential bearings but none in the hubs just plastic bushes. Bearings will tighten up wheel slop and allow your car to run cooler with a free running drivetrain giving you longer runtimes! |
This package has the parts much needed to setup and race a 94mm MA-010 virtually box fresh.
All the parts listed are a good starting point and should give a very neutral handling car, capable of some big lap counts!
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below:
